International Journal For Multidisciplinary Research

E-ISSN: 2582-2160     Impact Factor: 9.24

A Widely Indexed Open Access Peer Reviewed Multidisciplinary Bi-monthly Scholarly International Journal

Call for Paper Volume 6 Issue 6 November-December 2024 Submit your research before last 3 days of December to publish your research paper in the issue of November-December.

A Study on Choosing Bricks on Site During Construction

Author(s) Ashutosh Tyagi, Pankaj Singh, Amit Sharma
Country India
Abstract Large numbers of bricks are required to meet the needs of increasing population for both residential and commercial sectors. The overall development and industrial development lead to the use of the traditional bricks at a very hefty rate. The traditional bricks are commonly made up of clay as its main component as a result it is on the verge of exhaustion. To standardize its broad, utilize and discovering its auxiliary one is the need of the hour. In this study, bricks were made by using different proportions of alternative materials like fly ash(FA), sand, lime and plaster of Paris . The size of sample 220×130×900 mm was manufactured and quality constraints like compressive strength and water absorption were tested at different curing ages. The cost-effective mix design of the bricks for optimum compressive strength and rate analysis was also the part of this study. It was detected from the observation of results that the compressive strength decreases with increasing percentage in fly ash and increases with increasing percentage of sand and lime in fly ash-based bricks. Increment in water absorption was observed as fly ash content is increased and decrement of water absorption is seen with increasing percentage of sand and lime in fly ash-based bricks.
Keywords Fly Ash, Water Absorption, Lime, Rate Analysis
Field Engineering
Published In Volume 6, Issue 1, January-February 2024
Published On 2024-02-29
Cite This A Study on Choosing Bricks on Site During Construction - Ashutosh Tyagi, Pankaj Singh, Amit Sharma - IJFMR Volume 6, Issue 1, January-February 2024. DOI 10.36948/ijfmr.2024.v06i01.14205
DOI https://doi.org/10.36948/ijfmr.2024.v06i01.14205
Short DOI https://doi.org/gtktdv

Share this