The Relationship Between Aluminium Sulfate and Poly Aluminium Chloride On pH and Total Dissolved Solid ( Study Case : Water Treatment Plant In Terbanggi Besar - Pematang Panggang - Kayuagung Tollroad)

Deo Siregar; Irwan Bagyo Santoso

doi:10.36948/ijfmr.2024.v06i06.31226

The Relationship Between Aluminium Sulfate and Poly Aluminium Chloride On pH and Total Dissolved Solid ( Study Case : Water Treatment Plant In Terbanggi Besar - Pematang Panggang - Kayuagung Tollroad)

Author(s)	Deo Siregar, Irwan Bagyo Santoso
Country	Indonesia
Abstract	This research will discuss the relationship between coagulant aluminium sulfate and poly aluminium chloride (PAC) on pH and total dissolved solid parameter : study case of water treatment plant in terbanggi besar – pematang panggang – kayuagung tollroad. The study will describe the impact on water treatment especially on coagulation process with coagulant aluminium sulfate and poly aluminium chloride will affect pH and total dissolved solid in the final product. It was found that the use of aluminium sulfate coagulant resulted in average deviation of 9.8 % in total dissolved solid and 14.6% in pH compared to poly aluminium chloride coagulant. It happens due the characteristic of aluminium sulfate, which has density of 2.672 g/cm3 and pH range of 4.5 – 6.5. The dosage of aluminium sulfate required is higher than poly aluminium chloride to achieve the same result for adequate Indonesia regulation, increasing operational cost, particulary for aluminium sulfate coagulant needs. Therefore, poly aluminium chloride is the appropriate coagulant and can meet the quality standards according to Minister of Health Regulation Number 2 of 2023 by considering pH and total dissolved solid parameters in the water treatment plant at rest area 306 B on the terbanggi besar – pematang panggang – kayuagung tollroad. Monitoring these two parameter will affect other parameter, particularly iron (Fe) and manganese (Mn). This study will help operator at rest area 306 B to achieve the best dosage with jar test method for poly aluminium chloride coagulant and reduce operational and maintenance cost form previously using aluminium sulfate as coagulant.
Keywords	Aluminium Sulfate, Clean Water, Coagulant, Poly Aluminium Chloride, Rest Area, Water Treatment Plant
Field	Engineering
Published In	Volume 6, Issue 6, November-December 2024
Published On	2024-11-22
Cite This	The Relationship Between Aluminium Sulfate and Poly Aluminium Chloride On pH and Total Dissolved Solid ( Study Case : Water Treatment Plant In Terbanggi Besar - Pematang Panggang - Kayuagung Tollroad) - Deo Siregar, Irwan Bagyo Santoso - IJFMR Volume 6, Issue 6, November-December 2024. DOI 10.36948/ijfmr.2024.v06i06.31226
DOI	https://doi.org/10.36948/ijfmr.2024.v06i06.31226
Short DOI	https://doi.org/

View / Download PDF File

E-ISSN 2582-2160

doi

CrossRef DOI is assigned to each research paper published in our journal.

IJFMR DOI prefix is
10.36948/ijfmr

Downloads

Research Paper Format Copyright Permission Form and Undertaking Form Cover Page Vol 6 Isu 6 Cover Page Vol 6 Isu 5 Cover Page Vol 6 Isu 4

All research papers published on this website are licensed under Creative Commons Attribution-ShareAlike 4.0 International License, and all rights belong to their respective authors/researchers.

CC-BY-SA

About IJFMR Fees & Payment Current Issue Publication Archive	Submit Research Paper Track Submission Status Publication Guidelines Publication Ethics Peer Review & Plagiarism	Join as a Reviewer Editors & Reviewers Reviewer Referral Program Get Reviewer Membership Certi.	Website/Journal Policies Usage Policy Content Policies Privacy Policy

Contact Us		+91-9898-5948-55	editor@ijfmr.com

International Journal For Multidisciplinary Research

A Widely Indexed Open Access Peer Reviewed Multidisciplinary Bi-monthly Scholarly International Journal

The Relationship Between Aluminium Sulfate and Poly Aluminium Chloride On pH and Total Dissolved Solid ( Study Case : Water Treatment Plant In Terbanggi Besar - Pematang Panggang - Kayuagung Tollroad)

Share this